Torres, J., Cole, M., Owji, A., DeMastry, Z., and Gordon, A. P. (2016) “An Approach for Mechanical Property Optimization of Fused Deposition Modeling with Polylactic Acid via Design of Experiments” Rapid Prototyping Journal, (Accepted)
Torres, J., Cotelo, J., Karl, J., and Gordon, A. P. (2015) “Multi-Objective Optimization of a Fused Deposition Manufactured Polylactic Acid under Torsion“
Gordon, A. P., Bouchenot, T., and Penmetsa, R. (2015) “A Microstructurally-Informed, Continuum-Level Life Prediction Model for Thermo-Acousto-Mechanically Fatigue Ti-6242S and IN617“, AIAA SciTech.
Sedlack, M., Jasmin, A., Lavandera, P., Gordon, A. P., and Penmetsa, R. (2015) “Design and Evaluation of a Test Device for Thermal-Acoustical-Mechanical Fatigue Experiments, AIAA SciTech 2015, Kissimmiee, FL, January 5th-9th.
Williams, J., and Gordon, A. P. (2015) “Constitutive Modeling of a Gasket Material under Re-Torque,” TMS 2015 144th Annual Meeting & Exhibition, Orlando, FL, March 15th-19th.
Torres, J., Owji, A., DeMastry, Z., and Gordon, A. P. (2015) “Multi-objective Optimization of the Mechanical Properties of FDM PLA Components“, TMS 2015 144th Annual Meeting & Exhibition, Orlando, FL, March 15th-19th.
Jasmin, A., Sedlack, M., Lavandera, P., Gordon, A. P., and Penmetsa, R. (2015) “Design and Assessment of a Test Platform for Advanced Simulation of Cyclic Thermo-Acousto-Mechanical Loading“, TMS 2015 (Jasmin) TMS 2015 144th Annual Meeting & Exhibition, Orlando, FL, March 15th-19th.
Bassem, F., Dyer, Z., and Gordon, A. P. (2015) “Evaluating the Accuracy of Constitutive Models for 2.25Cr-1Mo under Creep, Plasticity, and Thermomechanical Fatigue.” , TMS 2015 144th Annual Meeting & Exhibition, Orlando, FL, March 15th-19th.
Algarni, M., Bai, Y., Jia, Y., Gordon, A. P., Karl, J., (2015) “Linkage Between Ductile Fracture And Extremely Low Cycle Fatigue Of Inconel 718 Under Multiaxial Loading Conditions” TMS 2015 144th Annual Meeting & Exhibition, Orlando, FL, March 15th-19th.
Bouchenot, T., Gordon, A. P., Shinde, S., Gravett, P., NEW (2014) “A Hysteresis For a DS Suprealloy Under Themomechanical Fatigue“
Kraft, S. M., Moslehy, F., Bai, Y., and Gordon, A. P. (2014) “Characterization of the Orthotropic Elastic Constants of a Micronic Woven Wire Mesh via Digital Image Correlation“
Leser, Christoph, Kelso, Frank, Gordon, Ali P., and Ohnsted, Sherri, “Software Tools for a Materials Testing Curriculum“
Sedlack, M., Jasmin, A., Lavandera, P., Gordon, A., NEW (2014) “Design and Evaluation of a Test Device for Thermal-Acoustical-Mechanical Fatigue Experiments“
Zuanetti, B., Mutter, N., and Gordon, A. P. (2014) “Multi-rate and Multi-Modal Characterization of an Advanced Polyetherimide“
Keller, S. G. and Gordon, A. P. (2014) “Coupled fatigue crack initiation and propagation model utilizing a single blunt notch compact tension specimen ASTM Materials Performance and Characterization (Accepted).
Day, D. W., and Gordon, A. P. (2014) “Life Fraction Hardening Applied to a Modified Theta Projection Creep Model for a Nickel-based Super-alloy” Proceedings of ASME Turbo Expo 2014, Dusseldorf, Germany, June 3rd-7th.
Bouchenot, T., Shinde, S., Gravett, P., and Gordon, A. P. (2014) “A Non-Interactive Approach for Hystersis Modeling of Non-Isothermal Creep-Fatigue of a DS Ni-Base Superalloy” Proceedings of ASME Turbo Expo 2014, Dusseldorf, Germany, June 3rd-7th.
DeMarco, J. P., Karl, J., Sohn, Y., and Gordon, A. P., (2013) “Mechanical Characterization and Numerical Simulation of a Light-Weight, Aluminum A359 Metal Matrix Composite under Torsional Loading” Materials at High Temperature, (Accepted).
Day, D. W., and Gordon, A. P. (2013) “A Modified Theta Projection Creep Model for a Nickel-based Super-alloy” Proceedings of ASME Turbo Expo 2013, San Antonio, TX, June 3rd-7th.
May, D., Segletes, D., and Gordon, A. P. (2013) “The Application of the Norton-Bailey Law for Creep Prediction through Power Law Regression” Proceedings of ASME Turbo Expo 2013, San Antonio, TX, June 3rd-7th.
Algarni, M. S., Jia, Y., Karl, J., Gordon, A. P. and Bai, Y. (2013) “Linkage Between Ductile Fracture and Extremely Low Cycle Fatigue of Inconel 718 under Multiaxial Loading Conditions” Proceedings of ASME Turbo Expo 2013, San Antonio, TX, June 3rd-7th.
Stewart, C. M., and Gordon, A. P., (2013) “Numerical Crack Growth Simulation for Creep Cracking of Ni-Base Superalloy“, Proceedings of ASME Turbo Expo 2013, San Antonio, TX, June 3rd-7th
Karl, J., and Gordon, A. P., “Computational Viscoplasticity-Based Modeling of Stress/Strain Response in Thermomechanical Fatigue Loads“, 50th AIAA Aerospace Sciences Meeting, 2012.
Stewart, C. M., and Gordon, A. P. (2012) “Constitutive Modeling of Multistage Creep Damage in Isotropic and Transversely-Isotropic Alloys with Elastic Damage” ASME Journal of Pressure Vessel Technology, Vol. 134, No. 4. (Link)
Zhuge, J., Gou, J., Chen, R.-H., Gordon, A. P., Kapat, J., Hart, D., and Ibeh, C. (2012) “Fire retardant evaluation of carbon nanofiber/graphite nanoplatelets nanopaper-based coating under different heat fluxes” Composites Part B, DOI: (Link)
Kraft, S., and Gordon, A. P., (2012) “Yield Behavior of a Twill Dutch Woven Wire Mesh Via Experiments and Numerical Modeling” ASME Journal of Applied Mechanics, (Accepted Manuscript) DOI: (Link)
Keller, S. G., and Gordon, A. P. (2012) “Critical Stress and Stress Intensity Factor Dependence of Al-Hg Liquid Metal Embrittlement,” Engineering Fracture Mechanics, 84: 146-160. (Link)
Karl, J., and Gordon, A. P. (2012) “Life Prediction Feasibility in TMF via Stress/Strain Data from a Viscoplasticity Numerical Model” Proceedings of ASME Turbo Expo 2012, Copenhagen, Denmark, June 11th-15th, 2012.
Skovron, J. D., Zhuge, J., Gordon, A. P., and Gou, J. (2012) “Effect of Nano-Paper Coating on Flexural Properties of a Fire-Treated Glass Fiber-Reinforced Polyester Composite” TMS 2012 141st Anunal Conference and Exhibition, Orlando, FL, March 11th-15th. (Link)
DeMarco, J. P., and Gordon, A. P. (2012) “Prediction of Edge Cracking in an Aluminum Metal-Matrix Composite through Numerical Simulation of Hot Rolling” TMS 2012 141st Anunal Conference and Exhibition, Orlando, FL, March 11th-15th.
Mansfield, C. T., and Gordon, A. P. (2012) “Optimization of the Hot Rolling Parameters using ANSYS and LS-DYNA” TMS 2012 141st Anunal Conference and Exhibition, Orlando, FL, March 11th-15th.
Kraft, S., and Gordon, A. P. (2012) “Characterization of the Orthotropic Elastic Constants of a Micronic Woven Wire Mesh through Experiments and Modeling” TMS 2012 141st Anunal Conference and Exhibition, Orlando, FL, March 11th-15th.
Gordon, A. P. (2012) Dictionary of Experiments of Mechanics of Materials, Creative Printing and Publishing, Sanford, FL. (Link)
Gordon, A. P. (2011) “From DC to CTOD: How I Got Involved in Research,” Sigma Gamma Tau Honor Society Meeting, Orlando, FL, April 14th.
Stewart, C. M., Gordon, A. P., Hogan, E., and Saxena, A. (2011) “Characterization of the Creep Deformation and Rupture Behavior of DS GTD-111 Using the Kachanov-Rabotnov Constitutive Model” ASME Journal of Engineering Materials and Technology, Vol. 133 (2): 021013-1 – 021013-11. (Link)
Daubenspeck, B., and Gordon, A. P. (2011) “Extrapolation Techniques for Very Low Cycle Fatigue Behavior of a Ni-Base Superalloy” Journal of Engineering Materials and Technology, Vol. 133 (2): 021023-1 – 021023-11. (Link)
Gordon, A. P., Williams, J, and De Santiago, M. (2011) “Analytical Modeling of the Mechanics of Re-Torque” Proceedings of the ASME Conference on Pressure Vessels and Piping, Baltimore, Maryland, July 15th-23rd. (Link)
Drilling, B., Gordon, A. P., Kammerer, C, and Baldwin, F. (2011) “Optimization of Re-Torque in Bolted Flange Connections“, Proceedings of the ASME Conference on Pressure Vessels and Piping, Baltimore, Maryland, July 15th-23rd. (Link)
Stewart, C., and Gordon, A. P. (2011) “Extension of Creep Rupture Prediction Methods to Anisotropic Materials“, Proceedings of the ASME Conference on Pressure Vessels and Piping, Baltimore, Maryland, July 15th-23rd. (Link)
Keller, S., and Gordon, A. P. (2011) “Experimental Techniques for Delayed Stress Corrosion Cracking of Oil Pipeline Steels” Proceedings of the ASME Conference on Pressure Vessels and Piping, Baltimore, Maryland, July 15th-23rd. (Link)
Gordon, A. P. (2011) “Experimental Mechanics of Time-Dependent Materials,” University of North Carolina-Charlotte, Charlotte, NC, February 22nd.
Keller, S., and Gordon, A. P. (2010) “Stress Approximation Technique for Helical Compression Springs Subjected to Lateral Loading“, Proceedings of the ASME
International Mechanical Engineering Congress & Exposition, Vancouver, British Columbia, CA, November 12-18th.
Keller, S., and Gordon, A. P. (2010) “Stress Intensity Incubation Periods for the Al-Hg Couple Subjected to LME“, Proceedings of the ASME International Mechanical Engineering Congress & Exposition, Vancouver, British Columbia, CA, November 12-18th.
Stewart, C. M., and Gordon, A. P. (2010) “Analytical Method to Determine the Taertiary Creep Damage Constants of the Kachanov-Rabotnov Constitutive Model“, Proceedings of the ASME International Mechanical Engineering Congress & Exposition, Vancouver, British Columbia, CA, November 12-18th.
Kraft, S., and Gordon, A. P. (2010) “Elasto-Plastic Properties of a Twill Dutch Woven Wire Mesh“, ASME Early Career Technical Conference, Atlanta, GA, October 1-2nd.
Stewart, C. M., and Gordon, A. P. (2010) “Crack Initiation Modeling of Turbine Blade Cooling Holes under Creep Conditions,” Florida Center for Advanced Aero-Propulsion (FCAAP) Annual Technical Symposium, Tallahassee, FL, August 9-10th.
Keller, S.G., and Gordon, A.P. (2010) “An Experimental Approach For Delayed Stress Corrosion“, Proceedings of the ASME Conference on Pressure Vessels and Piping, Seattle, Washington, July 18th-22nd.
Stewart, C. M., and Gordon, A. P. (2010) “An Anisotropic Tertiary Creep Damage Model for Directionally-Solidified Ni-base Superalloys,” Proceedings of the ASME Conference on Pressure Vessels and Piping, Seattle, Seattle, Washington, July 18th-22nd.
Mixa, M., Gordon, A. P., and Petit, A. (2010) “Considerations of Critical Analyses for Meso-scale High Temperature Rotating Devices,” Proceedings of the ASME Turbo Expo, Glasgow, UK, June 14-18th.
DeMarco, J. P., Stewart, C. M., Hogan, E., and Gordon, A. P. (2010) “An efficient method for the Optimization of Viscoplastic Constitutive Model Constants“, Proceedings of the ASME Turbo Expo, Glasgow, UK, June 14-18th.
Keller, S.G., and Gordon, A.P., (2010) “Incubation Behavior of Hg-LME in Aluminum,” Proceedings of the TMS Annual Meeting and Exhibition, Seattle, Washington, February 14-18th.
Stewart, C. M., and Gordon, A. P. (2010) “A Creep Rupture Time Model for Anisotropic Creep-Damage of Transversely Isotropic Materials“, Proceedings of the TMS Annual Meeting and Exhibition, Seattle, Washington, February 14-18th.
Gordon, A. P. (2010) “Mechanical Behavior Modeling for Applications Involving Rate-Dependent Materials” A joint seminar between the Department of Materials Science and Engineering and the Department of Mechanical & Aerospace Engineering, University of Florida, Gainesville, FL, December 7th.
Gordon, A. P. (2010) “Mechanical and Materials Characterization of a Lightweight Metal Matrix Composite” University of Miami, Miami, FL, October 22nd.
Gordon, A. P. (2010) “Advances in Mechanical Characterization of Materials” ASME Florida Section Meeting, Orlando, FL, September 30th.
Keller, S. G., and Gordon, A. P. (2010) “Critical Experiments to Characterize Al-Hg LME” ONR Workshop on Fatigue and Corrosion Cracking, Rochester, NY, May 15-16th.
Stewart, C., and Gordon, A. P. (2009) “A Temperature-Dependent Tertiary Creep Modeling of a Ni-base Alloy.” Journal of Pressure Vessel Technology, Vol. 131, No. 5, pp. 051406-1-051406-11.
Gordon, A. P., Neu, R. W., and McDowell, D. L. (2009). “Effect of Pre-Exposure on Crack Initiation Life of a Directionally-Solidified Ni-base Superalloy.” International Journal of Fatigue, Vol., 31 pp. 393-401. (Link)
Stewart, C.M, and Gordon, A.P. (2009) “Modeling the temperature-dependence of tertiary creep damage of a directionally solidified Ni-Base superalloy,” Proceedings of the ASME International Mechanical Engineering Congress & Exposition, Lake Buena Vista, Florida, November 13-19th.
Stewart, C., and Gordon, A. P. (2009) “A Novel Anisotropic Tertiary Creep Damage Model for Transversely-Isotropic Materials” Proceedings of the 12th Annual International Conference on Pressure Vessel Technology, Jeju Island Korea, September 20-23rd.
Keller, S. G., and Gordon, A. P. (2009) “Stress Intensity Factor Dependence of Hg-LME in Aluminum” International Symposium on the Stress Corrosion Cracking in Structural Materials at Ambient Temperatures, Padova, Italy, Aug. 30th-Sept. 4th.
Barnes, G., Mixa, M., and Gordon, A. P. (2009) “Considerations for Experimental Simulation of Internal Cooling.” 47th American Institute of Aeronautics and Astronautics (AIAA) Aerospace Sciences Meeting (ASM), Orlando, FL, January 5-8th.
Stewart, C., Nicholson, D. W., and Gordon, A. P., (2009) “Numerical Simulation of Temperature-Dependent and Anisotropic Tertiary Creep Damage.” 47th American Institute of Aeronautics and Astronautics (AIAA) Aerospace Sciences Meeting (ASM), Orlando, FL, January 5-8th.
Hogan, E., and Gordon, A. P. (2009) “A technique to minimize the number of experiments for constitutive model development.” International Symposium on Plasticity, St. Thomas, VI, January 3-8th.
Gordon, A. P. (2009) “A Novel Method for the Determination of Viscoplastic Model Constants.” Florida International University, Miami, FL, September 17th.
Gordon, A. P. (2009) “A technique to minimize the number of experiments for constitutive model development.” University of Nevada-Reno, Reno, NV, May 16th.
Gordon, A. P., and Keller, S. G. (2009) “Critical Experiments of Stress Corrosion Cracking of an Aluminum Alloy by Mercury” ONR Workshop on Fatigue and Corrosion Cracking, Rochester, NY, June 16-17th.
Gordon, A. P., Hogan, E., and Nicholson, D. W., (2009) “Novel Automated Streamlined Processes for Constitutive Modeling,” Florida Center for Advanced Aero-Propulsion (FCAAP) Annual Technical Symposium, Orlando, FL, August 13-14th.
Keller, S. and Gordon, A.P. (2009) “Stress Intensity Factor Dependence of Hg-LME in Aluminum.” SEM Annual Conference & Exposition on Experimental and Applied Mechanics, New Mexico, June 1-4th.
Stewart, C., and Gordon, A. P. (2009) “A Temperature-Dependent Tertiary Creep Modeling of a Ni-base Alloy.” Journal of Pressure Vessel Technology, Vol. 131, No. 5, pp. 051406-1-051406-11.
Gordon, A. P., Neu, R. W., and McDowell, D. L. (2009). “Effect of Pre-Exposure on Crack Initiation Life of a Directionally-Solidified Ni-base Superalloy.” International Journal of Fatigue, Vol., 31 pp. 393-401. (Link)
Stewart, C.M, and Gordon, A.P. (2009) “Modeling the temperature-dependence of tertiary creep damage of a directionally solidified Ni-Base superalloy,” Proceedings of the ASME International Mechanical Engineering Congress & Exposition, Lake Buena Vista, Florida, November 13-19th.
Stewart, C., and Gordon, A. P. (2009) “A Novel Anisotropic Tertiary Creep Damage Model for Transversely-Isotropic Materials” Proceedings of the 12th Annual International Conference on Pressure Vessel Technology, Jeju Island Korea, September 20-23rd.
Keller, S. G., and Gordon, A. P. (2009) “Stress Intensity Factor Dependence of Hg-LME in Aluminum” International Symposium on the Stress Corrosion Cracking in Structural Materials at Ambient Temperatures, Padova, Italy, Aug. 30th-Sept. 4th.
Barnes, G., Mixa, M., and Gordon, A. P. (2009) “Considerations for Experimental Simulation of Internal Cooling.” 47th American Institute of Aeronautics and Astronautics (AIAA) Aerospace Sciences Meeting (ASM), Orlando, FL, January 5-8th.
Stewart, C., Nicholson, D. W., and Gordon, A. P., (2009) “Numerical Simulation of Temperature-Dependent and Anisotropic Tertiary Creep Damage.” 47th American Institute of Aeronautics and Astronautics (AIAA) Aerospace Sciences Meeting (ASM), Orlando, FL, January 5-8th.
Hogan, E., and Gordon, A. P. (2009) “A technique to minimize the number of experiments for constitutive model development.” International Symposium on Plasticity, St. Thomas, VI, January 3-8th.
Gordon, A. P. (2009) “A Novel Method for the Determination of Viscoplastic Model Constants.” Florida International University, Miami, FL, September 17th.
Gordon, A. P. (2009) “A technique to minimize the number of experiments for constitutive model development.” University of Nevada-Reno, Reno, NV, May 16th.
Gordon, A. P., and Keller, S. G. (2009) “Critical Experiments of Stress Corrosion Cracking of an Aluminum Alloy by Mercury” ONR Workshop on Fatigue and Corrosion Cracking, Rochester, NY, June 16-17th.
Gordon, A. P., Hogan, E., and Nicholson, D. W., (2009) “Novel Automated Streamlined Processes for Constitutive Modeling,” Florida Center for Advanced Aero-Propulsion (FCAAP) Annual Technical Symposium, Orlando, FL, August 13-14th.
Keller, S. and Gordon, A.P. (2009) “Stress Intensity Factor Dependence of Hg-LME in Aluminum.” SEM Annual Conference & Exposition on Experimental and Applied Mechanics, New Mexico, June 1-4th.
Gordon, A. P., Trexler, M. D., Neu, R. W., Sanders, T. J., McDowell, D. L. (2007). “Corrosion Kinetics of a Directionally Solidified Ni-base Superalloy” Acta Materialia, Vol. 55, No. 10, pp. 3375-3385. (Link)
Gordon, A. P., Khan, S., and Nicholson, D. W., (2007) “Temperature and Orientation Dependence of Creep Damage of Two Ni-base Superalloys,” Proceedings of the ASME Pressure Vessels and Piping Division/CREEP8 Conference, San Antonio, TX, July 22-26th.
Karl, J., Schulist, M., Williams, E., and Gordon, A. P., (2007) “Real-Time Health Monitoring of Metal Structures Utilizing Electrically Conductive Coatings” 21st Canadian Congress of Applied Mechanics, Toronto, Ontario, June 3-7th. (Link)
Gordon, A. P. (2007). “Coupled Creep-Fatigue-Environment Damage Modeling of a Directionally-Solidified Ni-base Superalloy,” Material Science & Technology (MS&T) Conference 2007, Detroit, MI, September 16-20th.
Gordon, A. P. (2007). “Fatigue-creep-environment Interactions in Ni-base Superalloy,” FAMU-FSU College of Engineering, April 10th.
Gordon, A. P. (2007). “Fatigue-creep-environment Interactions in a Directionally-solidified Ni-base Superalloy,” Morehouse College, Department of Physics, Atlanta, GA, March 15th.
Qui, S., Krishnan, V. B., Shamieh, F. H., Gordon, A. P., Brown, D. W., Clausen, B. and Vaidyanathan, R. (2007) “In Situ Neutron Diffraction Measurements of Internal Strain Evolution During Creep in Directionally Solidified Ni-base Superalloys” Annual Joint Symposium for Florida Chapter of the AVS Science and Technology Society (FLAVS) and Florida Society for Microscopy (FSM), Orlando, FL, March 11-16th.
Gordon, A. P., Neu, R. W., and McDowell, D. L. (2006). “Fatigue-creep-environment Interactions in a Directionally-solidified Ni-base Superalloy,” 16th European Conference of Fracture (ECF16), Alexandroupolis, Greece, July 3-7th.
Gordon, A. P., Vaidyanathan, R., Clausen, B., Qiu, S., Krishnan, V., Schulist, M., and Williams, E. (2006) “Neutron Diffraction Measurements to Assess Remaining Life in a Directionally-Solidified Ni-base Superalloy,” Electric Power Research Institute (EPRI) International Conference on Advances in Condition and Remaining Life Assessment for Fossil Power Plants, Louisville, KY, October 17th.
Shenoy, M. M., Gordon, A. P., Neu, R. W., and McDowell, D. L. (2005). “Development of a Constitutive Law to Model the Thermomechanical Fatigue Behavior of a Directionally Solidified Ni-Base Superalloy.” Journal of Engineering Materials and Technology, Transactions of the ASME, Vol. 127, No. 3, pp. 325-336.
Gordon, A. P., Shenoy, M. M., and Neu, R. W. (2005). “A Thermomechanical Fatigue Crack Initiation Model for Directionally-Solidified Ni-base Superalloy,” 11th International Congress of Fracture (ICF11), Turin, Italy, March 20-25th.
Gordon, A. P., and McDowell, D. L. (2005). “Simulation of Creep Crack Growth of a Directionally-Solidified Ni-base Superalloy,” 11th International Congress of Fracture (ICF11), Turin, Italy, March 20-25th.
Gordon, A. P. (2005). “Crack Initiation Modeling of a Directionally-Solidified Ni-base Superalloy” University of South Florida, Department of Mechanical Engineering, Tampa, FL, March 16th.
Gordon, A. P. (2005). “Crack Initiation Modeling of a Directionally-Solidified Ni-base Superalloy” United States Naval Research Laboratory, Materials Science and Technology Division, Washington, District of Columbia, Washington, DC, February 25th.
Gordon, A. P. (2005). “Crack Initiation Modeling of a Directionally-Solidified Ni-base Superalloy” North Carolina State University, Department of Mechanical Engineering, Raleigh, NC, February 15th.
Gordon, A. P. (2005). “Crack Initiation Modeling of a Directionally-Solidified Ni-base Superalloy” Howard University, Department of Mechanical Engineering, Raleigh, NC, February 8th.
Gordon, A. P., and McDowell, D. L. (2004). “Mixed Mode Loading of an Interface Crack Subjected to Creep Conditions,” Journal of Pressure Vessel Technology, Transactions of the ASME, Vol. 126, No. 4, pp. 478-484. (Link)
Gordon, A. P., and McDowell, D. L. (2004). “Numerical Simulation of Time-Dependent Fracture of Graded Bimaterial Metallic Interfaces” International Journal of Fracture, Vol. 126, No. 4, pp. 321-344. (Link)
Gordon, A. P., and McDowell, D. L., (2003). “Mixed Mode Loading of an Interface Crack Subjected to Creep Conditions,” Proceedings of the ASME Pressure Vessels and Piping Division, Cleveland, OH, July 20-24th.
Gordon, A. P. (2003). “Thermomechanical Fatigue of a Directionally Solidified Ni-base Superalloy,” ASTM May Committee Week Meeting, Kansas City, Missouri, May 5-7th.
Gordon, A. P. (2003). “Numerical Simulation of Crack Tip Behavior in a Ni-Based Superalloy,” Georgia Tech Graduate Technical GT2 Symposium, Atlanta, GA, February 11-12th
Gordon, A. P. (2002). “Numerical Simulation of Interface Fracture in Superalloys at Elevated Temperatures” Clark Atlanta University Engineering Seminar, Atlanta, GA.
Gordon, A. P. (2002). “Numerical Simulations of Time-Dependent Interface Fracture,” Florida Georgia-Louis Stokes Alliance for Minority Participation (FG-LSAMP), Tallahassee, FL.
Gordon, A. P., and McDowell, D. L. (2001). “Crack Plane Influence on Time-Dependent Fracture of Bimaterials,” 10th International Congress of Fracture (ICF10), Honolulu, Hawai’i, December 5-7th.